8가지의 다양한 모델을 통한 고객의 사용범위에 맞는 압축공기의 다양한 온도를 제공하기 위한
독창적인 디자인의 Walkerfiltration Heater Packages.

• 1

  Semi-automatic drain valve (SDV25) are fitted to all heaters. Float operated automatic drain valves (DVAS16) are fitted to pre-filters

• 2

  When liquid, oil and water are present, FH or FTH models should be specified.

• 3

  Electrical connections to the unit are via an industry standard DIN connector

• 4

  When placing an order, please specify voltage required. Example A39FTH-115V.

• 5

  If used in a breathing air installation, please note adequate breathing air filtration is required prior to the heater assembly. Please note the airline heater and filter packages will not remove certain types of gases, including carbon monoxide (CO) and carbon dioxide (CO2).

• 6

  Threaded filters are manufactured from cast aluminium alloy and are PED 97/23/EC compliant for group 2 gases.

• 7

  Threaded connections are Rp (BSP parallel) to ISO 7/1 or NPT to ANSI B2.1 if supplied within North America.

• 8

  For NPT connections, add the suffix N e.g. A39BHN.

• 9

  Minimum flow rate of 3 Nm³/h (1.7 SCFM) is recommended.